Clay Brick Making Wet Pan Mill Grinding With Electric Motor TWPM185

Wet pan mill TWPM185 China wet pan grinding mill for clay brick making factory crushing machinery

Clay brick making line equipment TWPM185 wet pan mill :

TWPM-185 wet pan mill is a new product developed by our company on the basis of absorbing the advanced experience of similar products abroad, and it occupies a leading position among similar products in China. The machine is reasonable in structure, stable in operation, low in failure rate, and easy to use and maintain. It is mainly used for raw material treatment in the production process of sintered bricks with coal gangue, fly ash, shale, clay and sludge as the main raw materials. It has the functions of crushing, grinding, kneading and mixing. After the raw materials are milled and processed by this machine, the comprehensive technological properties of the raw materials can be significantly improved, and higher quality sintered products can be produced.

Wet pan mill of technical parameters:

Wet pan mill of working principle and structural characteristics:

The electric motor provides the motive power, and the electric motor drives the hydraulic coupling to realize the no-load and stable start of the electric motor. The power is transmitted to the reducer through the pulley, and the reducer drives the main shaft to rotate through the coupling. The main shaft and the suspension seat are connected by an expansion sleeve, and the torque transmission is realized by the friction between the expansion sleeve, the main shaft and the suspension seat. The advantage is that it is easy to install and disassemble, and it can realize overload protection for the main shaft and avoid damage to the processing surface of the main shaft. The suspension seat transmits power to the inner and outer cantilevers respectively, and drives the two rollers to rotate around the main shaft, and the rollers rotate around their respective roller shafts at the same time. The raw materials mixed with water in the previous process fall from the central feeding hopper at the top of the equipment to the front of the inner roller. After being crushed and crushed by the inner roller, the material is scraped by the floating scraper onto the outer roller raceway, and passes through the outer roller. After rolling, the raw materials are rolled and extruded through the holes of the sieve plate to complete the crushing, mixing, grinding and kneading of various raw materials.

Wet pan mill in fully automatic clay brick production line

Wet Pan Mill Grinding

Electric Motor Wet Pan Mill

Clay Brick Making Wet Pan Mill Grinding With Electric Motor TWPM185 Images